World of test and calibration
World of test and calibration
close
View Left Column
19 products
Grid
Grid-2
List
List-2
Catelog
€194.33
Other detection devices
Dustproof / splashproof(IP54) design .
Large volt mark with the buzzer sound
Automatic data hold function
Bar graph just like analog meter
Large display with backlight
Easy to use & tough body
IP54
Continuity test(200mA) function
€194.33
€215.69
Earth tester PDR4000
Other detection devices
Easy to read with backlight .
Three measurement ranges: 40Ω, 400Ω, 4000Ω
3-pole/2-pole earth resistance measurement (Optional accessory TL-68 is necessary for 2-pole measurement.)
Auto power off (10 min./Cancelable)
Capable of measuring interference voltage
2mA measuring current.
€215.69
Industrial Grade Chilled Mirror Hygrometer - Michell Optidew
Reference instruments
Features
New chilled mirror hybrid sensor gives fast dynamic response to changes in humidity
Accurate to ±0.15°C dew point, ±0.1°C temperature
Wide measurement range from -40 to +120°C dew point
Choice of communication methods, including Modbus TCP over Ethernet communication for easy networking
Optional pressure...
€0.00
Chilled Mirror Hygrometer - Michell S8000 Remote
Reference instruments
Features
Fundamental, accurate and low-drift measurement
Remote sensor
Open design allows remote sensor to be mounted into a sample flow or simply placed in an environment to be monitored
-40 to +120°C dew-point range with ±0.1°C accuracy
Data logging via USB, Ethernet or SD card
'FAST' guarantees frost...
€0.00
RH and Temperature Probe Calibrator - Rotronic HygroGen 2
Humidity/dew point
Features
Generates stable humidity 2…99 % RH and temperature -5…60 ° conditions (<±0.1 %RH, <±0.01 °C)
Humidity and temperature changes in less than 5 min
Time-saving multiply probes calibration
User programmable calibration sequence with up to 200 steps
Automatic calibration (optional)
Integrated FDA 21...
€0.00
€0.00
Ariadna IC2G
Electrical Safety
LV Energised Cable Identifier
There are many situations in which it is necessary to quickly and accurately identify live Low Voltage (LV) cables, for example, when opening a trench, making a branch in a line, before carrying out some maintenance tasks, when making a new connection, …
Merytronic has developed the Ariadna IC2G, an ultra-portable Cable...
€0.00
€208.29
Insulation tester MG1000
Other detection devices
Automatic determination of the live state of the measurement line .
Hot-line state(30V minimum) detection
Large volt mark with the buzzer sound
Automatic data hold function
Bar graph just like analog meter
Large display with backlight
Easy to use & tough body
IP54
Continuity test(200mA)...
€208.29
€539.96
Insulation tester MG5000
Other detection devices
High voltage type .
Test voltage DC5000V/2500V/1000V/500V/250V
Insulation Resistance up to 1TΩ
Short circuit current up to 4mA
Dielectric Absorption Ratio(DAR)
Polarisation Index(PI)
Auto discharge function
Data hold(Auto)
Auto power save
€539.96
Underground cable and pipe locator and tracer MRT-700
Underground location
Underground cable and pipe locator and tracer
The MRT-700 device is an underground cable and pipe locator, which makes it possible to trace distribution networks quickly, easily and accurately.
Energised Cables
De-energised Cables
Low Voltage, Medium Voltage and High Voltage Lines
Metallic and non-metallic...
€0.00
Phase and feeder identifier ILF G2
Network topology identification
The ILF G2 device, phase and feeder identifier, makes it possible to identify in a few seconds and with total reliability, to which Secondary Substation, Low Voltage panel, feeder output and phase each of the meters/subscribers of the Low Voltage electric grid are connected.
€0.00
Underground cable and pipe locator MRT-500
Underground location
Underground cable and pipe locator
The MRT-500 device is an underground cable and pipe locator, which makes it possible to trace distribution networks quickly, easily and accurately.
Energised Cables
De-energised Cables
Low Voltage, Medium Voltage and High Voltage Lines
Metallic and non-metallic...
€0.00
MRT-700 FF for fault pinpointing on cables and pipes
Underground location
By combining the MRT-700 device with the A-frame connected to the receiver, it is possible to identify and locate the exact point of the faults. A special frequency – 8KFF – (Fault Locating Frequency) is injected to perform this detection work. High accuracy (<5 cm).
€0.00