- Non-invasive flow measurement - not causing process shut downs or interrupting supply
- Long term remote measurements outdoors of up to one week
- Measurement ready in less than 5 minutes
- Highly rugged water-tight transducers (IP68) and transmitter
- User-friendly menu navigation - the firmware is specifically adapted to the needs of the water industry
- For nominal diameters of 25 mm to 3 m and flow velocities of 0,01 to 25 m/sec
- Independent of pipe material and manufactured quality
- Digital signal processor (DSP) and signal processing ensure stable and reliable results even under difficult measurement conditions
- High measuring accuracy, even at low flow velocities
The FLUXUS F601 is the portable clamp-on flow meter of choice for servicing and maintenance activities, the control and auditing of measurement points not covered by permanent meters, or even the temporary replacement of permanently installed flow meters.
The FLUXUS F601 is measurement ready in less than 5 minutes, including the measurement of the pipe wall thickness, the connection of the transducers to the transmitter, the parameterization of the flow meter and finally the mounting of the transducers.
Though featuring an ergonomic design, which offers simple handling and maximum ease of use, the F601 was designed to easily withstand rough industrial environments. Besides its sturdy housing, the F601 portable flow meter features stable and precise push-pull transducer connectors with the cables themselves being steel armored to prevent breaking or rupturing during daily work.
With its Li-Ion battery, the F601 allows for up to 14 hours of autonomous measurement. Matched and paired transducers as well as sophisticated algorithms care for the correction of pipe wall echoes and a wrong transducer positioning, thus ensuring reliable and highly accurate measurements - even during the most demanding application conditions. Due to the new HybridTrek mode, the portable flow meter can also reliably and accurately measure the liquid flow under conditions with a high content of solid particles or gaseous loads.
The FLUXUS F601 portable clamp-on flow meter is also available in an "Energy" and "Multifunctional" version , allowing the measurement of thermal energy / BTU flows and making the flow meter the ideal companion for the analysis or auditing of heating and chiller plants. The collected data can be used to perform a complete energy balance or to assist during process monitoring and optimization.
Techninės charakteristikos
| Flow channels | 2 |
| Operating temperature of the transmitter | -10°C ... 60°C |
| Degree of protection | |
| Electronic unit | NEMA 4X / IP65 acc. to EN60529 |
| Transport case | NEMA 6 / IP67 acc. to EN60529 |
| Battery | Li-Ion, 7.2 V / 4.5 Ah, > 14 hours operating time |
| Inputs and outputs | |
| Standard Version | Outputs: 2 x current, 2 x binary |
| Energy Version | Inputs: 2 x Pt 100 / Pt1000 Outputs: 2 x current, 2 x binary |
| Double Energy Version | Inputs: 4 x Pt 100 / Pt1000 Outputs: 2 x current, 2 x binary |
| Multifunctional Version | Inputs: 2 x Pt 100 / Pt1000, 2 x current Outputs: 4 x current, 2 x binary |
| Media temperature | -40°C ... 200°C (-190°C ... +600°C with High Temperature WaveInjector mounting fixture) |
| Pipe diameter range | 6 mm ... 6500 mm |
| Flow velocity range | 0,01 ... 25 m/s |
| Measurement accuracy (standard) |
±1.6 % of reading ±0.01 m/s |
| Measurement accuracy (extended calibration) |
±1.2 % of reading ±0.01 m/s |
| Measurement accuracy (field calibrated) |
±0.5 % of reading ±0.01 m/s |
Pirkti Fluxus F601
Jei turite klausimų dėl įrangos, susisiekite su mumis elektroniniu paštu: This email address is being protected from spambots. You need JavaScript enabled to view it. ARBA telefonu: +370 (5) 210 22 74.
Fluxus F601, kaina: ---- eurų