MMX-6 - ultragarsinis storio matuoklis

• Weight:  10 ounces
• Size: 2.5 W x 4.75 H x 1.25 D inches (63.5 W 120.7 H x 31.8 D mm)
• Operating Temperature: -20° to 120° F (-30° to 50° C)
• Case: Extruded aluminum body / nickel plated aluminum end caps. Resistant to impact and environmentally sealed.

Keypad

• Sealed membrane that is resistant to both water and petroleum products.
• Nine tactile-feedback keys.

Transducer

• Dual element (transmit and receive.)
• 1 to 10 MHz frequency range.
• Special high damped transducers available for use with through paint or coating measurements.)
• Locking quick disconnect LEMO connectors.
• 4 foot cable.
• Optional cable lengths up to 100 feet.
• Custom transducers available for special applications.

Power Source

• Two 1.5V alkaline or 1.2V NiCad AA cells
• Typically operates for 200 hours on alkaline and 130 hours on NiCad.
• Display flashes when battery is low. Unit turns off automatically when battery is too low to operate reliably.

• Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
• Backlight is selectable: on / off / auto ( illuminates only when taking a measurement ).
• Measurements displayed in inches, inches/microsecond. millimeters, and mters/second.
• Bar graph indicates stability of reading.

Measuring

• Range:
• Pulse Echo Mode (Pit & Flaw Detection):
• Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
• Echo Echo Mode (Thru Paint & Coatings):
• Measures from 0.100 to 1.0 inches (2.54 to 25.4 millimeters).
• Switch to select English or metric units.
• Resolution: 0.001 inches (0.01 millimeters)
• Velocity Range: .0492 to .3937 in/microsec (1250 to 10,000 meters/sec).
• Built in: Stainless steel reference disk for probe zeroing.
• Four readings per second for single point measure ments or 16 per second in scan mode — captures the minimum thickness.
• Single and Two point calibration option included.

• Multi-Mode: Toggle between Pit/Flaw detection (Pulse Echo Mode), and through Paint/Coatings (Echo-Echo Mode) with the single press of a button.
• Alarm Mode: Enter a minimum acceptable thickness value.
• If measurement falls below minimum, red led will illuminate and sound beeper. If measurement is above minimum value, green led will illuminate.
• Data Ouput: RS232 output sends thickness readings to a computer  or other external storage device

Certification

• Factory calibration traceable to national standards.

Warranty

• 5 year limited

Downloads

• View Specs
  View Prices
  View Manual
  Get Acrobat ®