Sauso tipo temperatūros kalibratorius - termostatas ISOTECH Jupiter 650

• Temperatūros diapazonas: nuo +35 iki 650 °C
• Stabilumas per 30 min.:
• Prie 50 °C ±0,02 °C
• Prie 250 °C: ±0,02 °C
• Prie 650 °C: ±0,03 °C
• Juodo kūno blokas šaltinis: ±0,3 °C
• Paviršiaus temperatūros jutiklių kalibratorius: ±0,5 °C

• Skystųjų kristalų ekranas

• Įmontuoto termometro skyra:
  • 0,01 °C ribose iki 99,99 °C
  • 0,1 °C ribose iki 100,0 - 650,0 °C
  • (skyra  0,01 °C visame temperatūros diapazone, naudojant kompiuterį ir komplekte pateiktą programinė įrangą)
  • Kameros matmenys: 35 mm diametras ir 148 mm gylis
• Keičiamos gylzės
• Gilzės su įvairaus diametro angomis pagal individualius klientų poreikius
• Galimybė užprogramuoti temperatūros kalibravimo taškus, kiekvienam taškui nurodant temperatūrą ir išlaikymo laiką
• Galimybė prijungti tikrinamuosius varžinius jutiklius, termoporas (K, N, R, S, L, B, PL2, T J, ir E), 4 - 20 mA keitiklius prie termostato bei atvaizduoti matavimo duomenis papildomame indikatoriuje (tik S modelyje)
• Maitinimas: 200 - 240 V(1000 W)
• Svoris: 8.5 kg
• Garantija 12 mėn

• Aprašymas anglų kalba (PDF)

- Kaina: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Sauso tipo temperatūros kalibratorius - termostatas ISOTECH Jupiter 650

• Temperatūros diapazonas: nuo +35 iki 650 °C
• Stabilumas per 30 min.:
• Prie 50 °C ±0,02 °C
• Prie 250 °C: ±0,02 °C
• Prie 650 °C: ±0,03 °C
• Juodo kūno blokas šaltinis: ±0,3 °C
• Paviršiaus temperatūros jutiklių kalibratorius: ±0,5 °C

• Skystųjų kristalų ekranas

• Įmontuoto termometro skyra:
  • 0,01 °C ribose iki 99,99 °C
  • 0,1 °C ribose iki 100,0 - 650,0 °C
  • (skyra  0,01 °C visame temperatūros diapazone, naudojant kompiuterį ir komplekte pateiktą programinė įrangą)
  • Kameros matmenys: 35 mm diametras ir 148 mm gylis
• Keičiamos gylzės
• Gilzės su įvairaus diametro angomis pagal individualius klientų poreikius
• Galimybė užprogramuoti temperatūros kalibravimo taškus, kiekvienam taškui nurodant temperatūrą ir išlaikymo laiką
• Galimybė prijungti tikrinamuosius varžinius jutiklius, termoporas (K, N, R, S, L, B, PL2, T J, ir E), 4 - 20 mA keitiklius prie termostato bei atvaizduoti matavimo duomenis papildomame indikatoriuje (tik S modelyje)
• Maitinimas: 200 - 240 V(1000 W)
• Svoris: 8.5 kg
• Garantija 12 mėn

• Aprašymas anglų kalba (PDF)

- Kaina: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Sauso tipo temperatūros kalibratorius - termostatas ISOTECH FAST-CAL Temperatūros diapazonas (esant aplinkos temperatūrai 20 °C):

• nuo -35 °C iki 650 °C

Tikslumas:

• FAST-CAL HTM 2010: nuo ±0,15 °C iki ±0,2 °C
• FAST-CAL HTM LOW: nuo ±0,15 °C iki ±0,2 °C
• FAST-CAL HTM MEDIUM: nuo ±0,2 °C iki ±0,3 °C
• FAST-CAL HTM HIGH: nuo ±0,5 °C iki ±2 °C

• Temperatūros diapazonas (esant aplinkos temperatūrai 20 °C):
  • FAST-CAL HTM 2010: nuo -35 °C iki 140 °C
  • FAST-CAL HTM LOW: nuo -35 °C iki 140 °C
  • FAST-CAL HTM MEDIUM: nuo +30 °C iki 350 °C
  • FAST-CAL HTM HIGH: nuo +35 °C iki 650 °C
• Tikslumas:
  • FAST-CAL HTM 2010: nuo ±0,15 °C iki ±0,2 °C
  • FAST-CAL HTM LOW: nuo ±0,15 °C iki ±0,2 °C
  • FAST-CAL HTM MEDIUM: nuo ±0,2 °C iki ±0,3 °C
  • FAST-CAL HTM HIGH: nuo ±0,5 °C iki ±2 °C
• Kameros matmenys:
  • FAST-CAL HTM 2010: skersmuo 8mm, 6,5 mm arba 3x4,5mm; gylis -148 mm
  • FAST-CAL HTM LOW: skersmuo 25mm; gylis 148 mm
  • FAST-CAL HTM MEDIUM: skersmuo 25mm; gylis 148 mm
  • FAST-CAL HTM HIGH: skersmuo 25mm; gylis 148 mm
• Temperatūrinių relių tikrinimas (papildomas priedas)
• Srovinis 4 - 20 mA įėjimas (papildomas priedas)
• Matmenys: 228x248x143 mm
• Maitinimas: 200 - 240 V(1000 W)
• Svoris: 6,35 - 6,6 kg
• Garantija 12 mėn

• Aprašymas anglų kalba (PDF)

- Kaina: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Apollo 1: 37°C; 65°C; 100°C; 121°C; 130°C
Apollo 2: 100°C; 150°C; 200°C; 250°C; 300°C

The Apollo Dry Block range offer a complete self contained and simple solution for the checking and calibrating of temperature sensors. The sensors under test are placed in the large block and one of the five preset temperatures is selected, the temperature from the sensor is then recorded against the value from the Apollo’s UKAS Calibration Certificate. This calibration certificate is included as standard. The moderate temperature range, deep immersion depth and fixed block allow it to be issued without the need for an external standard.

The Apollo is widely used as a reference standard in hospitals, local government and food industries etc. The Apollo has been developed from Isotech’s very first dry block and has a long history of successful use. See the calibration history chart of a typical bath.

The block has four 8mm pockets and four 19.5mm pockets all 160mm deep.

The Apollo can be provided with customer selected temperatures in addition to the two standard models which have the following temperatures preset.

• Aprašymas anglų kalba (PDF)

- Kaina: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Temperatūros diapazonas -100°C to +40°C
Absoliutus stabilumas:

• Prie 0°C ±0.03°C (30 minučių)
• Prie -90°C ±0.02°C (30 minučių)

Tai yra vienintelis sausojo tipo blokas, kurio minimali temperatūra -100°C. Dabar jau įmanoma sukalibruoti tokius temperatūros jutiklius, kaip PRTs, Termoporas ir termistorius prie labai žemos temperatūros be skysčio vonelės.

• Pirmasis pasaulyje -100°C Sausasis blokas
• Minimali temperatūra -100°C (-148°F)
• Jokių brangių skysčių

• Specifikacija anglų kalba (PDF)

- Kaina: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Nuo 30°C iki 700°C
Stabilumas: ±0.5°C - ±0.001°C

Isotech have a wide range of Dry Blocks to suit probes requiring a large immersion depth. These products feature large and deep calibration volumes. As such they are less portable than the earlier Dry Blocks, but have higher capacities and retain outstanding temperature uniformity, this uniformity is so good that these larger products are also apparatus for Secondary Laboratories to realize the Fixed Points of ITS-90.

• High Capacity Deep Block
• Use for Comparison and Fixed Point Calibration
• Use with very long thermometers

• Aprašymas anglų kalba (PDF)

- Kaina: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Temperatūros diapazonas: 450°C to 1100°C
Stabilumas: ±0.05°C

Model 426 is for Aluminium, Silver, Gold or Copper slim fixed point cells as well as for comparison calibration. Heat pipes provide the ideal conditions for the creation and maintenance of slim ITS-90 cells.

The furnace core is a specially-designed stress-free isothermal heat pipe, which provides a very low thermal gradient along the core working length.

The heat pipe is designed so that the inner wall is not subject to thermal expansion stresses from the outer wall before the heat pipe reaches conduction temperature. The working fluid is permanently and safely sealed within the plasma-arc welded enclosure.

The Oberon can be used with Blackbody Fixed Point Cells.

• Aprašymas anglų kalba (PDF)

- Kaina: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.

Nuo 150 iki 1200°C
Aukštos temperatūros nešiojama kalibravimo krosnis
Kompiuterio sąsaja bei programinė įranga

The PegasusPLUS1200 range offers extreme high temperature thermocouple calibration in an easy to use portable package - ideal for the calibration of high temperature thermocouples. It has been designed for fast heating and finds applications in the glass, electrical power, automotive and material processing industries. A Blackbody target can be added for the calibration of infrared thermometers.

The standard insert has four 8mm pockets 80mm deep. The metal insert is strategically placed beneath 50mm of insulation to provide optimal performance over the radiant temperature range. For larger blocks see the Oberon model. The Pegasus is available in two models, the BASIC (B) and the SITE (S). The B model should be used with an external reference probe and indicator, such as the TTI 7. The thermocouples under test should be calibrated by comparison to the external probe.

The S model includes a built in digital indicator to which an external standard thermometer should be connected, giving greater accuracy eliminating temperature gradient and loading errors. The recommended probe is a platinum Type R thermocouple. The optional Blackbody target is used with a specially angled Type R thermocouple that sits immediately behind the target area.

Includes as standard: Windows Software and a Computer Interface. Increased resolution of ±0.1 available throughout the range via the PC interface and from 150.0 to 999.9 locally on the autoranging front display. The controller features multi-point block to display correction giving good absolute accuracy.

• Aprašymas anglų kalba (PDF)

- Kaina: This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
- This e-mail address is being protected from spambots. You need JavaScript enabled to view it.